Sonda per la misura del contenuto volumetrico di acqua nel suolo, temperatura e conducibilità
- Moisture and nutrient status in the root zone
- Rapid monitoring of growing conditions
- Calibrations for many soils and substrates
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the plant.
Rapid checks on growing conditions
The sensor is easily inserted into substrates, composts and most soils. It takes less than 5 seconds to measure water content (%), pore water conductivity (ECp) and temperature – all being important indictors of root zone health.
Pore water conductivity
The WET Sensor is able to calculate pore water conductivity (ECp) which is the EC of the water available to plant roots. The ECp calculation is derived from an approximate relationship between dielectric properties. This applies particularly well to WET Sensor readings, which are taken at the same frequency within the same defined region of soil/substrate. The approximation is valid in most soils and is particularly accurate in mineral wool and other artificial substrates media.
Fertigation and hydroponics
Where plants are grown in artificial substrates using hydroponic or fertigation systems, nutrients are routinely supplied in irrigation water. Nutrient levels are controlled by monitoring the water content and conductivity (EC) and adjusting the injection of liquid fertiliser into the irrigation water. The Delta-T Devices WET Sensor excels in monitoring this crucial information.
Container-grown shrubs and trees
Nutrients are sometimes provided by fertigation but are often provided by Controlled Release Fertilisers (CRF). The rate at which these are taken up depends on several factors, including the weather conditions and irrigation regime.
The Delta-T Devices WET Sensor can be used to measure the EC within the growing media and so take much of the guesswork out of this process.
If the irrigation water is recycled or abstracted from rivers and aquifers with high levels of dissolved salts, over time there can be a build up of soil salinity. Soil salinisation will eventually reduce crop yields. The WET Sensor is fast and efficient for sampling soil salinity, ensuring that farmers have the essential information they need to take remedial action as quickly as possible.
Permettività ε′ 1..80
Conducibilità elettrica ECb 0..300 mS.m-1
Temperatura -50..50 °C
Contenuto volumetrico 0..0.8 m^3/m^3
Permettività ε′ ± 2.5
Conducibilità elettrica ECb ± 10 mS.m-1
Temperatura ± 1.5 °C
Contenuto volumetrico ± 0.05 m^3/m^3
TTL232 - compatibile con GP1, GP2, HH2
Consumo 38mA per 2.5s
Temperatura operativa 0..+50°C
Grado di protezione IP68
|Size & Weight
Dimensioni 55 x 45 x 12mm